6500 FRONT MOUNT
The Front Mount boat lift mounts to the front of your dock with two dock brackets. These brackets hold the front of the frame in place with solid-steel circular-pivots and allow the back of the boat lift to lower. The two side brackets that are attached to the side of the dock support the lift when it is in the down position. This leaves the boat lift in a slanted position with the back of the lift submerged underwater, basically just like a trailer backed down a ramp.
You then drive your boat up the lift just like a trailer backed into the water. The polymer cradles hold your boat in place while you let the blower motor raise your boat and steel frame completely out of the water. The side brackets that stop your lift from going down too far are solid steel and mounted to the dock inner-frame. When the lift is in the upright position the side brackets which now look like a capital “T,” are actually applying up pressure to your dock. With your boat lift locked in the upright position, you are virtually adding extra floatation to your dock and combining your boat lift and dock as one. All steel parts are above the water line when your lift is in the raised position preventing expensive annual maintenance due to rust and corrosion